Anatiferous blog | Move every zig.

Meta-Site

Welcome to Anatiferous: Using barnacles to make geese since 1689!

Howdy! This is my (William Reading's) webpage. At the moment, I only have this blog script and my gallery up, but I hope to get more stuff on this page at some point, or so I thought when I created this site years ago. Updates and shiny new copy to eventually go here. If you'd like to contact me to point out that I've done something to break XHTML/CSS standards or heaven forbid--look at my Vita--drop me a line at my e-mail address bill +spam @ [ELEPHANT] aggienerds.org. Simply remove "+spam", the spaces and the pachyderm along with its brackets and that address will reach me. I'm also available on Jabber/GChat/AIM/MSN with the same address above.

11/9/2005

D-Link DVG-1120S

Filed under: — bill @ 6:47 pm

If you just happen to have one of these boxes (DVG-1120S), you can get them to work properly with Asterisk with something like this:


[200]
username=200
type=friend
secret=SECRET
qualify=no
port=5060
nat=never
mailbox=200@default
host=dynamic
dtmfmode=inband
context=internal
canreinvite=no
callerid="Phone 1″<200>

For those of you who don’t know, you can buy a cheap DVG-1120M with the AT&T CallVantage kit and easily convert it to a DVG-1120S with updated firmware here. At the moment, you can buy them from Best Buy for $30 (link).

1 Comment

  1. Trying to get this working right now. Have re-flashed and done what I thought was a good extension setup. I can see the registration confirmation and the lease time from the dlink.

    However, the green alarm light constantly flashes, and I can’t seem to get a dial tone on the phone I have plugged into it.

    Any suggestions on what to look at next?

    Thanks

    Comment by Sugar Dave — 6/30/2006 @ 4:24 pm

RSS feed for comments on this post.

Leave a comment

Sorry, the comment form is closed at this time.

 

Google
 
Web anatifero.us
aggienerds.org

Powered by WordPress